Device Wifi Configuration

Instructions

We suggest performing the following on a mobile device, to allow easy scanning.

• Enter WIFI configuration details in the form above.
• Restart the EVT and allow it to complete its normal start up process (flashes and sounds). Once settled, you have a two minute window to scan and update the WiFi credentials. If you are outside this window, the device will process the code as a normal barcode.
• Scan the generated QR code with the EVT barcode scanner. You may need to print the QR code for it to scan correctly.

• If the code scanned successfully, indicated by the lights on top of the unit blinking Blue-Green-Blue, the EVT will enter a connecting state. If the EVT repeatedly flashes Blue-Green-Blue, it simply means the unit has read the code multiple times. This is expected behavior.
  The EVT may not acknowledge the scan on the main display, so it is necessary to check the status lights on the lower back of the device. The status lights should start blinking green to indicate that the device is attempting to connect to the WIFI network.

  

• When the EVT has connected successfully, the status lights will settle to a breathing cyan pattern. The device is now configured and connected to the network.

  
• If the EVT remains in a blinking green state, it was unable to connect with the access point.
  • Check that the password as been entered correctly
  • If you have selected WPA or WPA2 Authentication, change the Cipher. If it was AES, try TKIP, if it was TKIP, try AES.